STEP 1)
Press the top button on the Envoy S (underneath the phone icon, above the lightning bolt icon).
Step 2)
On a smartphone/laptop/computer, connect to the Envoy’s Wi-Fi network (ENVOY_xxxxxx where “xxxxxx” represents the last 6 digits of the Envoy serial number)
Step 3)
Step 4)
When prompted for login details, use these credentials:
Step 5)
Under the heading “Wi-Fi Network” if there is a network the Envoy is currently connected to, you will first need to click “More Info” and then click on “Forget This Network”. After doing this, click on “View Networks” and in the list of Wi-Fi networks that show up, find the internet network you want to connect to and click on it.
Step 6)
Enter the password for the Wi-Fi network and click connect.
a) If successful, go to the next step. If the connection is unsuccessful, click on “Connect Other Network” which shouls appear at the end of the list of available Wi-Fi networks.
b) Enter the network name into “Name (EDDID)” and network password manually.
c) For the “Security” setting, select “WPA Personal”.
d) For the “WPA Algorithm” setting select “TKIP” (this setting appears after y ou have selected a security setting.)
e) Click “Connect”. If the test is unsuccessful again, repeat steps A to C, but change the “WPA Algorithm” to “TKIP + CCMP” and click “Connect”.
Step 7)
After a few minutes the connection should become active; click on the blue arrow button at the top next to the title “Wi-Fi Configuration” to go back to the previous screen.
Step 8)
Click the button “Open Connection” which is located at the bottom under Connection to Enphase Support (this simply pushes through the internet connection status to Enlighten).
Unit 21/6 Gladstone Rd, Castle Hill NSW 2154
34 Chartwell Drive, Wantirna Victoria 3152
1800 338 809
info@rksolar.net
Unit 21/6 Gladstone Rd, Castle Hill NSW 2154
34 Chartwell Drive, Wantirna Victoria 3152
1800 338 809
info@rksolar.net